Welding Inspector Jobs in Indonesia

-------- JOB POSTING RULES --------

  • All postings must refer to a specific position.
  • Job postings must not contain multiple positions (must be created as separate job postings)
  • Job postings must not have job titles that exceed 80 characters.
  • Job postings must contain email addresses, phone numbers, physical addresses or contact names in the job description.

-------- JOB POSTING RULES --------

Welding Inspector in Riau Islands-Batam, Indonesia

Task andResponsibility :

  • Read and understandthe Inspection and Test Plan (ITP).
  • Read and understanddrawing (Description, Rev, BOM, NDT, PWHT,).
  • Patrol inspectionand ensure at lay down areas segregated / stainless steel & carbon steel.
  • Ensure welderqualification (Welder register).
  • Ensure procedurequalification (WPS register).
  • Verify correctmaterials to be weld (Material traceability-MCR compare to BOM).
  • Ensure correctequipment (Validation of welding machines).
  • Ensure correctconsumables and WPS numbers.
  • Random checkelectrodes / flux oven calibration record at electrodes stores.
  • Checkfit up prior to weld (Root gap, face, alignment, bevel angle, included angle,materials).
  • Checkspreheat temperature based on approved WPS prior to welding.
  • Ensuretacking and welding carried out as per approved WPS.
  • Receivingand reviewed CIR (Computerize Inspection Request) prior submit to otherssection.
  • Requestfor PWHT, PMI and performed Hardness/Ferrites test if necessary.
  • Followup and monitor repair if any.
  • Followup daily NDT result then release spools / items for painting or erection.
  • Whenassigned to Craft training Centre (Welding School), perform duties as perQP-27.
  • VisitPCM to review and sign off visual reports.
  • Fillingall related inspection documents in respective areas for back up purpose.
  • Whenassigned to Craft Training Centre (Welding School), perform duties as perQP-027.
  • Verifiesapproved WPS, Welders and tacker intended to the project have properly beenqualified.
  • High standard of safe working practice, qualityand productivity as well as compliance with the code of business conduct.

Experience:

  • Minimum more than 5 yearsexperience as Welding Inspector in Oil and Gas Fabrication.

Education:

  • Minimum Senior High School/Diploma.

CompanyOverview:

  • McDermott is a premier, fully-integrated provider of technology, engineering and construction solutions to the energy industry. For more than a century, customers have trusted McDermott to design and build end-to-end infrastructure and technology solutionsfrom the wellhead to the storage tankto transport and transform oil and gas into the products the world needs today.

Apply: https://www.oilandgasjobsearch.com/Oil-and-Gas-Jobs/Welding-Inspector-Jobs/Welding-Inspector/Details/1372037#

PT. Basuki Pratama Engineering
Lowongan Pekerjaan - QC Inspector (URGENT)

Job Description
Melakukan inspeksi kontrol kualitas.
Pekerjaan berkaitan dengan ITP, Welding, Dimensi.

Kriteria
Pria / Wanita maksimal 30 tahun.
Pendidikan S1 Teknik.
Memiliki Sertifikat Welding Inspector (WI).
Bahasa inggris aktif.

Dibutuhkan segera yang memiliki kualifikasi diatas bisa email ke [email protected]

PT Fresh Food Indonesia
Saat ini membutuhkan kandidat untuk posisi QC Inspektor

Kualifikasi

  • Pria/Wanita
  • Pendidikan Min SMA
  • Usia Min 20 Tahun
  • Pengalaman 1 Tahun dibidang Food & Beverage
  • Dapat Bekerja dalam Team, Teliti, Loyalitas Tinggi

Job Desk

  • Mengontrol Parameter CCP
  • Memonitoring Proses Produksi
  • Memastikan Kualitas Produk Akhir Sesuai dengan Standar
  • Melakukan Pengecekan Penerimaan Bahan Baku

Kantor Berada di Cakung Jakarta Timur

Silahkan kirim CV ke email [email protected] Subjek : QC Inspector

PT. Epsindo Jaya Pratama (EJP) membuka kesempatan kerja untuk posisi:
Design Engineer
Kualifikasi :

-Laki-laki maksimal usia 25 tahun
-Pendidikan minimal D3 Teknik pengalaman 3 tahun
-Memiliki pengetahuan mengenai Mekanika Teknik, Mekanika Fluida, & Material Teknik
-Mampu mengoperasikan software: Solidwork Mechanical, Sheet Metal, Weldment, & Solidwork Simulation
-Memiliki pengetahuan mengenai alat ukur (Dimensional, Pressure, & Electrical)
-Memahami proses permesinan & fabrikasi (Turning, Milling, Drilling, Grinding, & Welding)
-Mampu mengoperasikan MS-Office (Word, Excel, Visio, Powerpoint, & Project)
-Mampu berkomunikasi dengan baik (tertulis & verbal)

QC Engineer
Kualifikasi :

-S1 jurusan Teknis Elektro/ Mesin/ Metalurgy
-Pengalaman di pompa ESP/HPS min. 5 th
-Pengalaman pada posisi QA/QC min. 3 th
-Memiliki sertifikat kalibrasi, ISO 9001 Auditor, API Q1
-Memiliki sertifikat QC System Tools lebih diutamakan
-Fresh Graduate diperbolehkan melamar

QC Inspector

Kualifikasi:

-S1 Jurusan teknik Elektro/ Mesin/ Metalurgy
-Pengalaman di pompa ESP/ HPS min. 5 th
-Pengalaman pada posisi QA/QC min. 3 th
-Memiliki sertifikat NDE Level II
-Memahami peralatan tes pompa/ HPS
-Memiliki sertifikat kalibrasi alat ukur API Q1
-Fresh Graduate diperbolehkan melamar

Apabila anda berminat mendaftar, silakan kirim CV terbaru ke:
[email protected] dengan subjek Nama_Posisi yang dilamar
Rekrutmen ini tidak dipungut biaya.

HIRING NOW!!
1.Piping SV (Local/Tiger)
2.Instrument SV (Local/Tiger)
3.QC/CSWIP level 2 (local)
4.Piping QC - hookup piping system (local)
5.Piping Engineer

For MMC company!
Looking for the above position who have experienced in Coal fire Plant industry or similar.

Working location : Tanjung Jati (Accommodation Provided)
(a)Indonesia

Please submit your cv to [email protected] or [email protected]
Submit cv in Ms Word format. Certificates and testimonial in pdf.

Open for INDONESIAN citizen only.

Klien Kami Perusahaan Petrochemical Terbesar di Indonesia akan memulai Project Maintenance dan Expansi Plant membutuhkan Kandidat untuk segera direkrut dan ditempatkan bekerja pada bulan ini , dengan posisi pekerjaan sbb :

  1. INSTRUMENT CALIBRATION TECHNICIAN ( 14 Persons)
  2. ELECTRICAL TECHNICIAN - BROWN AREA ( 3 Persons)
  3. ELECTRICAL SUPERVISOR ( 3 Persons)
  4. PIPING SUPERVISOR ( 3 Persons)
  5. CIVIL CORROSION TECHNICIAN ( 4 Persons)
  6. MECHANICAL ROTATING TECHNICIAN (6 Persons)
  7. MECHANICAL STATIC TECHNICIAN (20 Persons)
  8. QC INSPECTOR ( 2 Persons)
  9. PROJECT CONTROL
  10. HSE, Safety Inspector ( 8 Persons )
  11. QA Rotating Engineer
    Kualifikasi :
  • Memiliki Sertifikat NDT RT, MTPT, UT & WI – No.8
  • Pengalaman di NDT & Mengetahui standar ASME I, ASME B313, ASME B3.1.1, ASME V, ASME VIII, API 650 – No.8
  • Dapat melakukan Leak Test , Lifting Calculation – No 6 & 7.

CV silahkan diemail ke : [email protected]
Hp/WA : 087880919356

  1. Fabrication Inspector - USD 140/Day
  2. Coating Inspector - USD 140/Day
  3. NDT Inspector - USD 140/Day
  4. QC Inspector - USD 160/Day
  5. Project Admin Asst - USD 75/Day
  6. Document Controller - USD 100/Day

Food, Accommodation, Transportation and Medical shall be provided by the company.

Leave shall be annually.

Location : Indonesia

Interested candidates may forward their CV with copies of full educational and experience certificates to [email protected]

HIRING NOW!!
1.Quantity Surveyor
2.Project Controller

For MMC company!
Knowledge in PJ Control have experienced in Power Plant site.

Working location : Sulsel Barru2 (Accommodation Provided)
(a)Indonesia

Please submit your cv to [email protected]
Submit cv in Ms Word format. Certificates and testimonial in pdf.

Open for INDONESIAN citizen only.

Currently we need several positions to be placed in Batam as below
 Talent Acquisition Specialist.
 Architectural Engineer
 Senior Hydro test Engineer
 Piping Engineer
 Structural Engineer
 Welding Inspector 3.1 and 3.2

And for Craft position:
 Welder
FCAW-GS 3G-4G/6G
FCAW-SS 6GR
GTAW-SMAW CS 6G
GTAW-SMAW SS 6G
GTAW-SMAW DSS 6G
 Process Electrician
 Instrument Fitter
 Painter / Sandblaster
If you interested this position, please submit your CV to: [email protected]

We are having requirement for subject position.
Personnel from Singapore / Malaysia / India / East Europe preferred.

Location- Batam, Indonesia
Work sch : 10hrs/ day & 5days/ week, might have to work for 6 days / in shifts during peak / conclusion stage of the project.
Hourly Rate for above position is $ 20 + free bachelor accommodation & transport.

Positions:

  • Lead Welding Inspector
  • Lead Structural Inspector
  • Lead Coating Inspector.

Candidate should have bachelors degree in Engineering.
Candidate should have 20 years experience.
Candidate should have experience of fabrication activities of Well HeadPlatforms-2 / Jackets / brownfield offshore structures etc…
Candidate should have experience working in Offshore Fabrication Yard
Should have worked as Lead, HOD, Manager, Head at least 3 years.
Candidate should have experience working as Client Rep or TPI
Interested candidate plz drop ur cv to [email protected]

URGENT HIRING

Position: Instrument Material Coordinator
Reports to: Head of Department
Approximate Duration of the Contract: 12 months
Work Location: Site - Papua
Start Date: ASAP

General Competencies

  • Min. 8 years’ of experience in similar field
  • Familiar with field work and construction in O&G industry
  • Active English speaker

If you are interested, please send your most recent and detailed CV in Word format file to: [email protected]

NOTE:

  • This position is only open to those who are currently in Indonesia.
  • Only Shortlisted candidates will be notified.
1 Like

Mr. Surin is seeking:

  • Welding Engineer – Indonesia - Jacket
  • Welding Inspector – Indonesia - Jacket Wellhead Platform

Contact point: Worldwide TPI Vendor Inspection Services

I am looking for Indonesian welding inspector in Oil&Gas industry. Salary is negotiable and work start immediately.
All people that is interested or looking for job in any field in Indonesia lease send to my personal email: [email protected]

…URGENTLY REQUIRED FOR QA/QC STAFF…

Job Description
・Coordinate with the customers representative on quality matters
・Distribute relevant QA/QC documentation to site subcontractors
・Reviewing quality management specifications and technical something documents to provide timely and meaningful feedback
・Checking engineer’s quality, how to work. ex.) Welding method, how to build and so on.

Requirements
-Min 2 years of experience in QA/QC of WTP/WWTP project
-Have Welding Inspector certificate and NDT MT, PT level 2 highly preferred
-Having knowledge on Code and Standards, such as API, ASME, ISO, NFPA, NEMA, ANSI
-understand Quality Assurance system (root cause analysis, corrective and preventive action)
-Having knowledge on fabrication process(cutting, fitting, welding, finishing, painting)

Send your CV to [email protected]

Dear All

We are now looking for Welding Inspector for Freelance position, prefered location in Jakarta Area. The job description will be the assesor of the Welder Candidates in terms of Practical Test.

Should you interest, please send me your update CV to my email [email protected]

Regards,
Resa Spetiara

We are looking one inspector who has certified in two discipline, i.e. Welding & Painting;

  • Work : Steel Structural Material(H-Beam and others) Fabrication Inspection

  • Name of Subcontractor : PT XXX

  • Location of Inspection : Cilegon

  • Duration of Inspection : 3 months (can be extended) ; starting from August 5th (Monday)

  • Requirements of Inspector must have competence in two discipline;

    1. Welding : AWS Welding Inspector or CSWIP 3.1 Welding Inspector
    2. Coating : SSPC or NACE Inspector

Please submit CV to [email protected] and CC to [email protected] by today (urgent).

Note: Mob demob cost from Batam and accommodation cost are to be responsible of DGS.

4 Likes

URGENTLY REQUIRED Welding Inspector with CSWIP 3.1 certified and minimum 5 years experience. Interested applicants can apply by e-mail to: [email protected] PT Cladtek Bi-Metal Manufacturing Batam Jl. Tengiri Batu Ampar Batam, Riau Island Indonesia

Looking local Indonesia Welding Inspector with qualification CSWIP 3.1
Work location Batam.

If your interested and qualified please drop your CV to my email at [email protected]

***** Senior Welding Inspector - Offshore Fabrication Projects *****

Full time residential position based in Batam, Indonesia. Role is open to local or foreign candidates, role holder must possess to be considered:

  • CSWIP - Senior Welding Inspector 3.2.2
  • PCN Level 2 or 3 - UT (Ultrasonic Testing)

Please forward me a CV if you would like to be considered: [email protected]