Heating & cooling Rate of PWHT

Greetings to every one
would highly be appreciated to be answered/ let me understanding the following.

thanks & Regards,

“PWHT heating and cooling rates > 316°C shall not exceed 222°C/hr. ÷ weld thickness in inches, but in no case > 222°C/hr”
56" dia 32mm wall thickness Tem range 595c to 649c

In general PWHT is only required for carbon steel material if the weld thickness>38mm .
In between 32 and 38 mm of weld thickness if u maintain a preheat of 95C u dont need any PWHT for Pno1 materials.
Every organization has their own procedure for PWHT that stays within the restrictions of UW-40 of ASME section 8 div1.

For example one company has a procedure for PWHT like this.
Loading temp:300
Rate of heating-100c/hr max
Cooling-100c/hr

U can’t go beyond 222c/hr on heating rate and 280c/hr on cooling but u can use the temp range within this limits.
And rate of heating and cooling shall not lower than 55c/hr.

1 Like

To easy understand, please see chart speed.

image

1 Like