Madatory tests given in type of test number 1 to 5.
Type of test no. 1, 2, 3, 4 may verify in the MTC to make sure all value comply with specification.
Type of test no. 5 is most missing in the MTC during reviewing process.
- Specific inspection (type 3.1; 3.2): NDT for weld seam shall be done and reported in the MTC.
- Non-Specific inspection (type 2.1; 2.2): NDT for weld seam not need to perform.
EN 10210-1 2006: 6.9 Non-destructive testing of welds The seam weld of all welded hollow sections supplied with specific inspection and testing shall be subjected to a non-destructive test in accordance with 9.4
Sample MTR type 3.1 : accepted
Sample MTR type 3.1 : Rejected