Forums > CSWIP  Material  Welding  > Testing  >  Standards > Others

Tagged: 

Viewing 0 reply threads
  • Author
    Posts
    • #13222 Reply
      bien
      Keymaster

      Below definitions are in ASTM A480-17 (for reference)

      __Plate, n—material 3 ⁄ 16 in. [5.00 mm] and over in thickness and over 10 in. [250 mm] in width. Finishes for plate are actually shown in Section 13 of ASTM A480.

      __Sheet, n—material under 3 ⁄ 16 in. [5.00 mm] in thickness and 24 in. [600 mm] and over in width. Finishes for sheet are actually shown in Section 11 of ASTM A480.

      __Strip, n—cold-rolled material under 3 ⁄ 16 in. [5.00 mm] in thickness and under 24 in. [600 mm] in width. Finishes are detailed in Section 12 for strip, and strip edges in Section 14 for Cold-Rolled Strip of ASTM A480.

Viewing 0 reply threads
Reply To: What the different between Plate, Sheet and Trip definitions
Your information:




Forums > CSWIP  Material  Welding  > Testing  >  Standards > Others

WIC-2560x512 Community

Services

Contact Us

Following Us

Disclaimer: Weldinginspections.net is based on information from multiple sources and our experience with welding and inspection scopes. It is not a replacement for manufacturers directions and is only to provide reminders for inspector.

© 2019 - 2021 weldinginspections.net | All rights reserved | Privacy Policy